상품상세 정보

뒤로가기

JConcepts B6/B6D Aluminum Servo Mount Bracket (Blue) [2567-1]

JConcepts B6/B6D Aluminum Servo Mount Bracket (Blue) [2567-1]

상품 정보
판매가 24600
할인판매가 24,600원
할인금액 총 할인금액 원
(모바일할인금액 원)
적립금

246원(1.00%)

무통장 결제시 적립금 %

카드 결제시 적립금 %

실시간 계좌이체시 적립금 %

적립금 결제시 적립금 %

휴대폰 결제시 적립금 %

예치금 결제시 적립금 %

에스크로 결제시 적립금 %

가상계좌 결제시 적립금 %

가상계좌 결제시 적립금 %

케이페이 결제시 적립금 %

페이나우 결제시 적립금 %

페이코 결제시 적립금 %

제휴적립금
배송방법 택배
배송비 3,000원 (50,000원 이상 구매 시 무료)
상품 추가설명 번역정보
배송
수량 up down  
상품 목록
상품 정보 가격 삭제
총상품금액(수량) 0
구매하기
구매하기

 


The JConcepts B6/B6D Aluminum Servo Mount Bracket is machined of billet aluminum and available in either blue or black colors, this unique part offers benefits over the stock mount configuration.

First, the mount fits snug inside the chassis servo mounting area increasing the support across while the 2 screw mounting locations are beefy in design and zeroed in for a direct mount to that chassis. Second, the bracket has locations on each side for included 3x6mm set screws to help align and maintain servo position during racing conditions, crashes and hard hits. The set screws are intended to touch-off against the servo case and provide additional support keeping the servo in the intended position which helps maintain consistent steering trim.

The servo mount bracket can be installed without any modifications or additional equipment in B6 vehicles and immediately brings peace of mind to the detail oriented racer. With a sleek wrap-around like design, silver edge chamfering and etched JConcepts.net logo the bracket adds consistency with aesthetic appeal.

Installation notes –
To install, completely remove servo from vehicle and remove standard mounts. With the servo horn already in the correct position, align plastic shims as previously used on the servo. Install bracket to each side and loosely fasten factory mounting screws with washers into the 4 locations and snug them. Now, center the servo between the bracket and install the 3x6mm set screws on each side, use a light amount of thread locking material and snug them to touch off and keep the servo in place.

Completely clamp the 4 mounting screws on the front side to lock servo position. Remember to always use a light about of thread locking material when securing steel screws into aluminum mounts. Reinstall the servo to vehicle and trim out and check EPA adjustments to complete assembly.

Features:

  • JConcepts original design and function
  • Machined aluminum, wrap-around concept
  • Set screw controlled centering feature
  • Silver edge chamfering with etched logo
  • Available in blue and black colors
  • Aesthetic jewelry
  •  


  • Team Associated RC10 B6
  • Team Associated RC10 B6D

  • 상품 상세 정보
    상품명 JConcepts B6/B6D Aluminum Servo Mount Bracket (Blue) [2567-1]
    제조사 PERFORMA RACING
    판매가 24,600원
    적립금 246원 (1%)
    배송방법 택배
    배송비 3,000원 (50,000원 이상 구매 시 무료)
    수량 수량증가수량감소

    결제 안내

    배송 안내

    • 배송 방법 : 택배
    • 배송 지역 : 전국지역
    • 배송 비용 : 3,000원
    • 배송 기간 : 2일 ~ 7일
    • 배송 안내 :

    교환/반품 안내

    환불 안내

    환불시 반품 확인여부를 확인한 후 3영업일 이내에 결제 금액을 환불해 드립니다.
    신용카드로 결제하신 경우는 신용카드 승인을 취소하여 결제 대금이 청구되지 않게 합니다.
    (단, 신용카드 결제일자에 맞추어 대금이 청구 될수 있으면 이경우 익월 신용카드 대금청구시 카드사에서 환급처리
    됩니다.)

    서비스문의 안내

    상품사용후기

    상품후기쓰기 모두보기

    게시물이 없습니다

    상품 Q&A

    상품문의하기 모두보기

    게시물이 없습니다

    판매자 정보