Lightweight, durable fiberglass hull with matching canopy and removable vertical fins: Because
the hull is lightweight and durable, you can push this hydroplane to
max speeds in race condition waters. The canopy, like the hull, is
constructed of hand-laid fiberglass. The vertical fins are removable and
replaceable. In case of a bad crash, they will simply break away
without damaging the hull.
Extreme power from waterproof electronics: The
UL-19 uses a Dynamite water-cooled 120A, 2-6S ESC that can handle more
amperage than needed to run the boat with authority and speed. The new
2000Kv 6-Pole motor features a large rotor that greatly increases motor
torque.
Stainless steel two-blade propeller: An
aggressive boat like the UL-19 deserves an equally aggressive two-blade
propeller. The UL-19's propeller lets you take full advantage of the
hull's performance. It features a high-pitch, high rake stainless steel
propeller that produces a tight thrust cone that results in better
propulsion and higher speeds that won't overload the electronics. You'll
be able to reach speeds on 4S that could only be reached on 6S by other
boats.
Interference-free connection: The
included Spektrum DX2E DSMR® 2.4GHz transmitter will provide a clear,
precise connection while the hydroplane is on the water.
Aluminum adjustable propeller strut: Use
the aluminum adjustable propeller strut to tune the boat to various
water conditions, from glass smooth to windy and choppy. The
square-bottom propeller strut allows more precise adjustments by acting
similar to a trim tab usually found on Deep-V boats.
Aluminum break-away rudder: The
aluminum rudder features a break-away design that will safeguard the
transom if the hydroplane hits an immovable object on the water or runs
ashore.
Stainless steel turn fin: The
stainless steel turn fin will keep the boat glued to the water whether
you're going straight or full throttle through a turn.
Features:
Fiberglass hull with matching canopy and removable vertical fins
Powerful waterproof electronics
Stainless steel two-blade propeller
Interference-free connection
Aluminum adjustable propeller strut
Aluminum break-away rudder
Stainless steel turn fin
Specifications: Approximate Assembly Time: No assembly required Beam: 16 in (406.4mm) Boat Type: Hydroplane Completion Level: Ready-To-Run Drive System: Flex Shaft Hull Height: 6 in (152.4mm) Hull Material: Fiberglass Length: 30 in (762mm) Motor Size: 3650 6 Pole Marine Motor 2000Kv (installed) Propeller Size: 1.7 x 1.6 Radio: DX2E (included) Recommended Battery: (2) 7.4V 5000MAH 2S 50C LiPo, with EC5 connector (sold separately) Scale: 30 inch Speed Control: 120A (installed) Steering: Rudder Trimscheme Colors: Blue and Yellow Type: RTR Hydroplane Weight: 5 lbs (2300g)